High Temp Co-Ni Frit
It is a hard Ground Coat Frits, can be applied to Cookware/Stove grill/Panel.
- 1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body.
- 2, Can be combined with cover coat in high level.
- 3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress.
- 4, With less viscosity and surface tension, it’s good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products.
- 5, With suitable expansion coefficient similar as steel plate.
Steel Plate Ground Coat Frit Usage Introduction:
Steel plate ground coat frit is mainly used in low carbon steel plate, with very good adhesion and wide firing temperature range. It can be single used, and can be also mixed with other ground coat frits according to firing temperature.
|Adherence||at least number 1|
|Coefficient of thermal expansion||288.1|
|This Ground Coat Frits does not contain Pb, Hg, Cd, Cr+6|
For enamel coating problems, you must be troubled!
1, Bad Surface Appearance: Black dot on white cover coat
2, Weak Adhesion Low impact resistance, easily broken
3, Fish-scale problem
For bad coating, Nolifrit can help you!
No black dot
23 Years of Technical Accumulation
- Focus on the research and development of enamel frit and enamel pigment for 23 years.
- Foreign experts joined, always stay on the cutting edge of technology in enamel industry.
30,000 MT Enamel Frit Annual Capacity
- Standarded EIA and ISO quality assurance.
- With large capacity and on-time delivery, huge cost advantage.
500 Customers over the world
- Nolifrit Can Offer Enamel Coating Solution within 48 hours.
- Nolifrit Will Offer Door-To-Door Technical Service If Customer Need.
Exported to 30 Countries and Areas
- High quality enamel frit and Cadmium red pigment can satisfy most of Europe and America customers.
- Mostly export to mid-to-high level customers in Taiwan, Southeast Asia, South America.
Professional BBQ Manufacturer in North America Mr. Jacky .Carl
We bought from Ferro(USA) before, and we started to try Nolifrit 10 years ago, then I never going to change supplier again. Nolifrit enamel frit quality stable , and their technical support without any delay. The most important is that they help us to save more than 20% enamel raw material cost, which makes us more competitive in the market.
The Most Famous Cast Iron Enamel Cookware Manufacturer in Europe Ms. Rose . Diane